{
  "version": "v0.35",
  "checked_on": "2026-10-15",
  "purpose": "设备设计评审方案、机械图纸和样机验收资料的公开模板参照",
  "adoption_status": "采用公开摘要和公开大纲的组织方式；未购买或声称阅读ISO标准全文，不声明整套符合标准",
  "references": [
    {
      "id": "T01",
      "title": "ISO 7200:2004 — Technical product documentation — Data fields in title blocks and document headers",
      "organization": "ISO",
      "url": "https://www.iso.org/standard/35446.html",
      "accessed_material": "官方公开摘要与版本信息",
      "what_it_supports": "技术文件标题栏和文件头的数据字段属于文件交换与管理规范的内容",
      "adopted_for_this_delivery": "统一图号、图名、版本、日期、图幅、单位、比例、页码和发布状态；设计、校核、审核签署栏留待责任人完成",
      "not_claimed": "未依据付费全文逐条检查字段长度、全部排版规则或标准符合性"
    },
    {
      "id": "T02",
      "title": "ISO 5457:1999 — Technical product documentation — Sizes and layout of drawing sheets",
      "organization": "ISO",
      "url": "https://www.iso.org/standard/29017.html",
      "accessed_material": "官方公开摘要与版本信息",
      "what_it_supports": "技术图纸图幅和布局的通用组织范围",
      "adopted_for_this_delivery": "图纸使用统一A3横向图幅和固定图框；分开总装、关键尺寸、接口和原理图，防止视图与说明混排",
      "not_claimed": "未引用未读到的标准条文、公差或特定图框尺寸"
    },
    {
      "id": "T03",
      "title": "NASA Systems Engineering Handbook — Appendix D: Requirements Verification Matrix",
      "organization": "NASA",
      "url": "https://www.nasa.gov/reference/appendix-d-requirements-verification-matrix/",
      "accessed_material": "官方公开正文",
      "what_it_supports": "唯一需求标识、来源和验证方法之间的追溯关系",
      "adopted_for_this_delivery": "需求ID→输入条件→检查/分析/演示/实测→允许结果→证据文件→当前状态；尚未验收项目保留未完成状态"
    },
    {
      "id": "T04",
      "title": "NASA Systems Engineering Handbook — Appendix I: Verification and Validation Plan Outline",
      "organization": "NASA",
      "url": "https://www.nasa.gov/reference/appendix-i-verification-and-validation-plan-outline/",
      "accessed_material": "官方公开正文",
      "what_it_supports": "验收计划的范围、职责、系统结构、设施、方法及由部件至整机的实施顺序",
      "adopted_for_this_delivery": "将文件检查、几何检查、解析计算、器件资料、样机测试和研究有效性分别记录，采用逐级升能的样机验收顺序"
    },
    {
      "id": "T05",
      "title": "NASA Systems Engineering Handbook — Appendix L: Interface Requirements Document Outline",
      "organization": "NASA",
      "url": "https://www.nasa.gov/reference/appendix-l-interface-requirements-document-outline/",
      "accessed_material": "官方公开正文",
      "what_it_supports": "接口坐标、单位、责任、载荷及机械、电气、信号、软件和环境条件的成套描述",
      "adopted_for_this_delivery": "用接口表明确设备本体、轮辋、传感器、控制柜、环境箱和试样的供货与确认边界；未知孔位使用可更换转接件，不从照片反推加工尺寸"
    }
  ]
}